În ofertă filtrul a găsit 7 produse convenabile
| Denumirea produsului | Vînzător | Descriere |
|---|
Produse din străinătate
| Denumirea produsului | Vînzător | Descriere | ||
|---|---|---|---|---|
| Industrial Temperature Sensor [SI-T-02] | IQ HOME Kft. | The IQ Home single Li-Ion Battery powered sensor family is developed for our automated measuring and data collectingsolution. Key features: - Low power ISM frequency based wireless sensor - Ready to use - IQRF - DPA compatible device - Single 3.6V Li-Ion Battery supply - More than 3 year battery life* - Easy to use communication protocol - Data collection from devices in one RF command *Battery life is depend of measurement frequency, sleep period time, RF network size, RF network topology, operation temperature. Package contains: SI-T-02 Temperature Sensor 3.6V Li-Ion Battery (already installed into the product) | Mai mult | |
| Industrial Gateway with Ethernet + 4G/LTE connection [GW-IND-01-4G] | IQ HOME Kft. | The IQ Home gateway family designed for IoT applications. The purpose of the gateway is to bridge the gap between IQRF DPA devices in the field and the Cloud in the easiest way. The gateway is optimized for IQRF DPA networks to manage and control complex environments. The gateway comes with Linux operating system with preinstalled custom software services. The IQ Home gateway is ready to use. All you need to do is to setup our cloud parameters in the gateway and bond IQRF DPA nodes via IQRF IDE. Ready to use gateway to connect IQRF networks to the Internet. - 2G/3G/4G/LTE Support LTE FDD: B1/B3/B5/B7/B8/B20 WCDMA: B1/B5/B8 GSM: 850/900/1800/1900MHz - Easy to create IoT sensor networks - Easy to integrate with IQRF based sensors - RTC on board in case of power outage - Protected EEPROM and Flash storage (eeRAID and eMMC RAID) - Enhanced reliability feautres - IQRF IDE UDP communication support - MQTT support - JSON messages - Automated periodical data collection - Automatic DPA timing management - Remotely configurable and accessible | Mai mult | |
| Modbus-RTU Master [MB-RTU-01/230] | IQ HOME Kft. | The IQ Home Modbus-RTU Master is developed for connect Modbus compatible devices with wireless communication. Key features: - Real-Time Wireless Solution - Modbus communication without wires - Easy integration of Modbus RTU device - Centralized Modbus RTU control - Centralized Modbus RTU data collection - Office, home or industrial usage - Low power ISM frequency based wireless sensor - Ready to use IQRF - DPA compatible device Typical applications: - Collect information from Modbus compatible end-devices - Control Modbus compatible actuators - Connect PLC-s with wireless communication Power Meter Application Note: - Connect Modbus compatible smart meter with MB-RTU-01 device - Collect measured data via wireless network - Monitor your electrical power consumption Package contains: - MB-RTU-01 Modbus-RTU Master | Mai mult | |
| Interior CO2, temperature and humidity sensors | Regmet s.r.o. | Measurement of temperature, humidity and CO2 concentration in interior applications. - ModBus RTU communication via RS485 line - possibility to display temperature, relative humidity and CO2 on the graphic display - long-term stability of CO2 measurement - NDIR sensor - version without display - placement in one KU68 module - version with diple - placement in two KU68 modules - a large selection of designs (electrical installation by ABB, Schneider, Legrand, Jung, Eaton, etc.) | Mai mult | |
| RLW-THC - Indoor air quality sensor | Unipi technology | Unipi RLW-THC IAQ sensor is designed for measuring indoor air quality in office buildings, schools, factory halls and other similar objects. Sensor can be used to measure temperature, relative air humidity, barometric pressure, carbon dioxide concentration, volatile organic compound concentration and ambient light intensity. Broad connectivity is provided by the support of communication via RS485, Wi-Fi and LoRaWAN wireless technology. | Mai mult | |
| Solar Control | Levtech Service & Production SRL | The purpose of the LSP-SC1 controller is to control a simple solar thermal system, which consists of a solar collector, a storage tank and a pump. Comparing the temperature between the collector and the storage tank, this device makes sure that the entire system is safe and highly efficient. It was designed for easy installation and usage. The control panel has no buttons and menu to avoid changing the settings by non-technicians/non-professional personnel. However, by removing the front cover, the technician/professional personnel can adjust the settings with the potentiometers and jumpers. | Mai mult | |
| Wireless thermometer, hygrometer, Sigfox IoT | COMET SYSTEM s.r.o. | The device measures the temperature and humidity from the built-in internal sensor. It is characterized by a simple compact design with the possibility of installation directly into the measured space. The sensor can be used with a suitable sensor cap even in more demanding conditions. The measured values are sent in an adjustable time interval (10 min to 24 h) by radio transmission in the Sigfox network to the COMET Cloud, from which the user can view them using a personal computer or mobile device. The instrument can monitor up to 2 alarm limits of the measured variable. Exceeding these limits is indicated by sending an emergency message. COMET Cloud transmits this alarm message via e-mail to the selected user. The device is suitable for applications that tolerate the delay of information delivered by Sigfox (max. 10 min). Highlights: wireless transmission of measured values and alarm status battery power with low battery indication (battery life 4 months to 7 years) external power with optional accessories remote setting of the device from COMET Cloud (maximum once a day) IP65 traceable calibration certificate in accordance with EN ISO / IEC 17025 | Mai mult |