eCube - az elektrotechnikai termékek ingyenes katalógusa

sk / cz / en / pl / hu / de / ro
Szűrő:
  Videóval ellátott termékek  
Kínálatunkban 9 a szűrésnek megfelelő termék szerepel.
A termék neve Eladó Leírás    
Külföldi termékek
A termék neve Eladó Leírás    
FDC13 Foxtron ltd. Output 0-10V For managing LED power suppliers or dimmable fluorescent lamp ballasts output for switching power ballasts Control by external buttons Testing buttons on the front panel Indication of output level and actual state Bővebben
PEA208 Foxtron ltd. Two independent analog outputs 0-10 V 10 bit differenciation two power outputs are automatically switched to the analog output voltage greater than 1 V (power fluorescent lamp ballasts) Bővebben
FTC03DALI Foxtron ltd. Programable unit for controlling DALI system touch screen scenes making execute commands by time conditional command execution by the state of inputs reading fluorescent tubes malfunctions Bővebben
DALIpwm15 Foxtron ltd. PWM dimmer DALI or SwitchSet control suitable for dimming LED strips input power 10 – 24V maximum load 15A signalization of output level and malfunction signalization of oncomming communication instalation on DIN rail (1 modul) Protection against overload and short-circuit Bővebben
The digital-to-analog expansion module PCU6 STERKRAK PCU6 module is used in automation systems to expand the number of digital inputs of PLC controllers. By connecting the device to an analog input of the controller, we get the ability to read and monitor 6 digital inputs. By using precision electronic components, the output voltage of the module is stable in time, temperature and precisely maps the input states. LEDs indicate the status of digital inputs. In our product offer can be found extension modules for PLCs with voltage, current and resistance (temperature) inputs. Bővebben
DALI2net Foxtron s.r.o. Converter two DALI buses / Ethernet DALI2net has two areas of usage: Control and monitoring DALI bus by superior systemAdjusting of device on DALI bus Control and monitoring DALI bus by superior system Control device may send messages of various length on DALI bus. Except standard messages may be also send messages eDALI, NEMA DALI, DIGIDIM DALI (Helvar) and other optional by user. DALInet supports Multimaster communication (multiple devices which actively send data on DALI bus). Superior system may sends the data anytime because message collision is handled by convertor. DALInet sends to superior system all communication ongoing on DALI bus. Superior system is also informed about other events on DALI bus (data collision, shortcut of the bus or connection of mains voltage). Setup of device on DALI bus Setup of device on DALI bus can be done with DALIconfig program which is downloadable below for free. Not only all DALI devices from Foxtron company can be set by this program - DALI4sw, DALIrel, DALIpwm, DALIpwm15, but also devices from other producers. Bővebben
DALImiw Foxtron s.r.o. DALImiw30 - Microwave combined DALI sensor DALImiw30 is combined sensor operating on DALI bus. It can regulate to ambient light control according to the motion in the sensed area. Range of sensor is adjustable by positioning head (up to 30 meters). It is possible to control the sensor using standard DALI messages. Bővebben
DALIpir20 Foxtron s.r.o. DALI high bay sensor - movement and lighting. Up to 15m. Bővebben
KNXnet Foxtron s.r.o. Converter KNX / ethernet Power supply passive PoE or 9-32V Indication of communication on KNX bus Galvanic isolation KNX/ETH Din rail mount KNXnet is a converter between KNX bus and Ethernet (TCP/IP). Communication on the TCP/IP side is done via simlpe ASCII protocol which is described in the User manual. Bővebben
Oldal 1 2 3 4 5
Iparág
Megoldások a következőkhöz
Hírlevél
Értékelések Hozzászólás a béta verzióhoz