eCube – catalog gratuit de produse electrotehnice

sk / cz / en / pl / hu / de / ro
Filtru:
  Produse cu video  
În ofertă filtrul a găsit 9 produse convenabile
Denumirea produsului Vînzător Descriere    
Produse din străinătate
Denumirea produsului Vînzător Descriere    
DALIpir Foxtron s.r.o. DALI multisensor for presence detection and lux level control Control to constant illumination depending on movement Light, motion or combined sensor function Powered from DALI bus or 230V DALIpir is multisensor for the DALI bus. It can regulate to constant lux level depending on the presence in the sensing area. Adjustable Presence Value, Absence Value, Run-on time, Fade times, Switch-off delay and Dead time. Mai mult
DALIpir20 Foxtron s.r.o. DALI combined sensor for presence detection and lux level control Designed to high bay installations Regulation to contstant light level depending on movement Powered from DALI bus DALIpir is multisensor for the DALI bus. It can regulate to constant lux level depending on the presence in the sensing area. Adjustable Presence Value, Absence Value, Run-on time, Fade times, Switch-off delay and Dead time. Installation hight is up to 20 meters. Sensing area can be modified with adjustable cover. Mai mult
DALImiw30 Foxtron s.r.o. Microwave combined detector Illuminance sensor Motion sensor Powered from DALI bus or 230V Range up to 30m - adjustable sensing distance DALImiw30 is combined sensor operating on DALI bus. It can regulate to ambient light control according to the motion in the sensed area. Range of sensor is adjustable by positioning head (up to 30 meters). It is possible to control the sensor using standard DALI messages. Mai mult
100-114-00 125W DC/DC converter 13-30V Input; 12V/5A + 5V/5A Output Q-PRODUCTS a. s. _ dual output 12V/5A + 5V/5A _ small size-factor _ wide input range 13 to 30VDC _ fanless solution _ designed for industrial applications _ 24/7 Mai mult
PowerCable REST 101x NETIO products a.s. NETIO PowerCable REST 101x is a smart WiFi power socket for integration with third-party systems using open API. PowerCable is a smart power extension cable with a WiFi connection to a LAN. Its web interface can be used to display the energy metering values and turn on/off the controlled output power socket PowerCable REST allows reading the measurements and controlling the output using one of three http-based REST protocols - XML, JSON or URL API. The PowerCable metered power socket connects to the network over WiFi (internal antenna). The NETIO WiFi Reconnect feature ensures stable availability of the device in an ordinary WiFi network. PowerCable REST 101x can be controlled with one of 3 different M2M protocols that communicate over http (default port 80) and can be protected with a password. The JSON and XML protocols transfer a text file using http get/post. Mai mult
PowerCable MQTT 101x NETIO products a.s. NETIO PowerCable MQTT 101x is a WiFi power socket (WiFi extension power cable) for integration with third-party cloud systems using open API. Its web interface and open API can be used to display the energy metering values (A, V, W, TPF, kWh, Hz, °) and turn on/off the controlled output power socket. PowerCable MQTT can be connected to any MQTT broker (LAN / internet) or online service, allowing to provide a “smart WiFi power socket” as a power metering and control service. With MQTT-flex, the structure of the MQTT communication can be customized. The device is ready for NFC-preconfig for easy configuration of the WiFi SSID and other parameters. PowerCable MQTT supports cloud protocols that automatically connect from the internal network to a portal (online service). The smart WiFi socket supports 3 cloud protocols: Http(s) push JSON/XML or MQTT. MQTT also includes SSL encryption support. The MQTT protocol can be configured in detail thanks to the MQTT-flex extension. In the MQTT-flex configuration, the user can define the MQTT message structure (Topic / Payload) as well as the conditions for sending individual messages (periodically, when a value changes by more than x, and so on). The PowerCable metered power socket connects to the network over WiFi (internal antenna). The NETIO WiFi Reconnect feature ensures stable availability of the device in an ordinary WiFi network. Mai mult
PowerCable Modbus 101x NETIO products a.s. NETIO PowerCable Modbus 101x is a smart WiFi power socket and a power extension cable designed by NETIO products. Using the Modbus/TCP protocol, it is possible to switch its power output on/off and read energy consumption remotely over the network. PowerCable connects to the network over WiFi (internal antenna). The output power socket can be turned On/Off over a web interface. The web interface also shows the measured electrical values (V, A, kWh, W, Hz, TruePF) at the metered power socket. PowerCable Modbus 101x supports the M2M Modbus/TCP protocol for controlling its output and reading the measured values. Modbus/TCP is a popular M2M protocol used in the industry world-wide. To increase security, PowerCable Modbus contains a built-in IP filter. The IP filter limits the range of IP addresses that are allowed to access the device using the Modbus/TCP protocol. The WiFi power cable supports IOC (Independent Output Control); the state of the output is not affected by weak WiFi signal, restart of the WiFi module, or even firmware upgrade. The power-up state of the smart power socket is configurable (On/Off/Last). An important feature for industrial control is ZCS (Zero Current Switching). This feature ensures that the relay is switched only when the immediate current value passes through zero. This feature ensures long-term durability even when switching capacitive loads (switching supplies common in ICT) or inductive loads (transformers, motors). The operating temperature range of NETIO PowerCable Modbus 101x is -10 to 65°C (at 65°C, the maximum current is limited to 5A). Electrical measurements (readings accessible over Modbus/TCP and the web) No special mobile application is needed for installing the WiFi controlled outlet and connecting it to a WiFi network. PowerCable Modbus works as a WiFi AP and a web based wizard will guide you through the configuration, including the selection of a WiFi network from a list. The setup process is simple and fast. Mai mult
NETIO PowerCable IQRF 901x NETIO products a.s. NETIO PowerCable IQRF is a smart power extension cable that communicates over the IQRF LPWAN network (868 MHz). The 230V/16A electrical socket features electricity metering (A, V, W, TPF, kWh, Hz) and can be switched on and off with full IQRF Interoperable support. Using the Smart connect function, PowerCable IQRF can be connected to the IQRF wireless network. The DPA protocol can be used to control the output or read the measurements (V, A, kWh, W, Hz, TruePF). PowerCable IQRF is constantly powered, so it also acts as a message repeater in the IQRF MESH network. PowerCable IQRF 901x supports IQMESH functions of the IQRF wireless network. The device supports the “IQRF Interoperable” DPA standard for sensors and I/O devices. The IQRF outlet supports IOC (Independent Output Control); output state is unaffected by firmware update. The PowerUp state function allows to specify the desired output state after power up (On / Off / Last). The Last option stores the last state of the output (on or off) before a power outage, and restores it when the power is restored. An important feature for light industrial use is ZCS (Zero Current Switching). This feature ensures that the relay is switched when the current passes through zero level. PowerCable IQRF 901x can be used at ambient temperatures from -10 to +65°C. Mai mult
PowerPDU 4C: PDU with energy metering and open API NETIO products a.s. NETIO PowerPDU 4C is a smart PDU (Power Distribution Unit) with four power outlets (4x IEC-320 C14). Each output can be controlled and metered independently. PowerPDU 4C includes a 2x LAN Ethernet switch and a serial port (RS-232). NETIO PowerPDU 4C can be mounted in rack cabinets (horizontally and vertically). Four different rack-mount brackets are available. PowerPDU 4C offers an open M2M API with 13 different M2M protocols that can be used for energy consumption metering and control of individual outputs. NETIO 4x smart power outlets can be connected to multimedia AV systems, cloud services (e.g. MS Azure IoT hub), the Node-RED environment, or smart home apps. Each of the four power outlets (IEC sockets) can be switched on/off with a button at the device or from the device’s web interface. The manufacturer provides a mobile app; however, the open API also allows the use of recommended third-party apps. Mai mult
Pagina 1 2 3 4 5
Sectorul industrial
Soluții pentru
Buletin
Evaluare Trimite sugestii despre versiunea BETA